1. The base is fixed on the body of the vehicle, and the base of the vehicle-mounted small crane can be fixed by bolts or by welding.
2. The whole part of the column and the boom is installed in the flange, and the 6 screws can be fixed and tightened with a hand wrench.
3. It is a very simple step. The hydraulic pump is installed between the upper half of the base, and the other end is installed at the rear end of the boom, and the screw is tightened to fix it.
4. The electric winch can be installed on the motor plate, and the screws must be fastened.
Operation mode of hydraulic vehicle-mounted small crane
1. In the process of using the hydraulic vehicle crane, first of all, we operate the hydraulic pump, insert the hydraulic rod into the hole of the hydraulic pump, and perform manual pressure up and down operation. At this time, the boom will slowly rise, so that you can install it yourself. environment for mobilization.
2. The base is much shorter than the multifunctional ordinary vehicle-mounted small crane, but this does not affect the overall operation. Both the column part and the boom part of this hydraulic small crane can rotate 360 degrees, which is equivalent to the fact that except for the base, other parts are Can be rotated.
3. The boom can be telescopically adjusted in three holes, and the length is very convenient to use.
4. If the boom is not in use, the boom can be folded, which takes up very little space, and it is very important that it does not get in the way.
Post time: Jul-26-2023